|
|
| |
Table of Contents
Conversion Formula for Flame to Lux
The formula of conversion of Flame to Lux is very simple. To convert Flame to Lux, we can use this simple formula:
1 Flame = 1 Lux
1 Lux = 1 Flame
One Flame is equal to 1 Lux. So, we need to multiply the number of Flame by 1 to get the no of Lux. This formula helps when we need to change the measurements from Flame to Lux
Flame to Lux Conversion
The conversion of unit Flame to unit Flame is very simple. Since, as discussed above, One Flame is equal to 1 Lux. So, to convert Flame to Lux, we must multiply no of Flame to 1. Example:-
| Flame | Lux |
|---|---|
| 0.01 Flame | 0.01 Lux |
| 0.1 Flame | 0.1 Lux |
| 1 Flame | 1 Lux |
| 2 Flame | 2 Lux |
| 3 Flame | 3 Lux |
| 5 Flame | 5 Lux |
| 10 Flame | 10 Lux |
| 20 Flame | 20 Lux |
| 50 Flame | 50 Lux |
| 100 Flame | 100 Lux |
| 500 Flame | 500 Lux |
| 1,000 Flame | 1,000 Lux |
Details for Flame (Historical Light Source)
Introduction : Represents the illuminance from a standard candle flame, typically about 1 lux at 1 meter.
History & Origin : Based on early photometric definitions before SI standardization.
Current Use : Used for historical comparisons or candlelight reference levels.
Details for Lux (SI Illuminance Unit)
Introduction : Lux is the SI unit of illuminance, measuring the luminous flux per square meter. It provides a standardized way to quantify how much light is hitting a surface.
History & Origin : Established as part of the SI system, the lux became the globally accepted unit for illuminance, replacing older regional units such as foot-candles.
Current Use : Used worldwide for lighting design, architecture, photography, and workplace safety to ensure appropriate lighting levels.
Convert Flame to Other Units
FAQ on Flame to Lux Conversion:
What is the Symbol of Flame and Lux?
The symbol for Flame is 'flame', and for Luxs, it is 'lx'. These symbols are used to denote illumination in everyday and technical measurements.
How to convert Flame(s) to Lux(es)?
To convert Flame(s) to Lux(es), multiply the number of Flames by 1 because one Flame equals 1 Luxs.
Formula: Luxs = Flames × 1.
This is a standard rule used in illumination conversions.
How to convert Lux(es) to Flame(s) ?
To convert Lux(es) to Flame(s), divide the number of Luxs by 1, since, 1 Flame contains exactly 1 Lux(es).
Formula: Flames = Lux(s) ÷ 1.
It’s a common calculation in illumination conversions.
How many Flame(s) are these in an Lux(es) ?
There are 1 Flames in one Lux. This is derived by dividing 1 Lux by 1, as 1 Flame equals 1 Lux(s).
Formula: Flame = Luxs ÷ 1.
It’s a precise unit conversion method.
How many Lux(es) are these in an Flame(s) ?
There are exactly 1 Luxs in one Flame. This is a fixed value used in the measurement system.
Formula: Lux(s) = Flames × 1.
It's one of the most basic conversions.
How many Lux in 10 Flame?
There are 10 Luxs in 10 Flames. This is calculated by multiplying 10 by 1.
Formula: 10 Flames × 1 = 10 Luxs.
This conversion is helpful for illumination measurements.
How many Lux(s) in 50 Flame?
There are 50 Luxs in 50 Flames. One can calculate it by multiplying 50 by 1.
Formula: 50 Flames × 1 = 50 Luxs.
This conversion is used in many applications.
How many Lux(s) in 100 Flame?
There are 100 Lux(s) in 100 Flames. Multiply 100 by 1 to get the result.
Formula: 100 Flames × 1 = 100 Lux(s).
This is a basic unit conversion formula.