|
|
| |
Table of Contents
Conversion Formula for Lux to Flame
The formula of conversion of Lux to Flame is very simple. To convert Lux to Flame, we can use this simple formula:
1 Lux = 1 Flame
1 Flame = 1 Lux
One Lux is equal to 1 Flame. So, we need to multiply the number of Lux by 1 to get the no of Flame. This formula helps when we need to change the measurements from Lux to Flame
Lux to Flame Conversion
The conversion of unit Lux to unit Lux is very simple. Since, as discussed above, One Lux is equal to 1 Flame. So, to convert Lux to Flame, we must multiply no of Lux to 1. Example:-
| Lux | Flame |
|---|---|
| 0.01 Lux | 0.01 Flame |
| 0.1 Lux | 0.1 Flame |
| 1 Lux | 1 Flame |
| 2 Lux | 2 Flame |
| 3 Lux | 3 Flame |
| 5 Lux | 5 Flame |
| 10 Lux | 10 Flame |
| 20 Lux | 20 Flame |
| 50 Lux | 50 Flame |
| 100 Lux | 100 Flame |
| 500 Lux | 500 Flame |
| 1,000 Lux | 1,000 Flame |
Details for Lux (SI Illuminance Unit)
Introduction : Lux is the SI unit of illuminance, measuring the luminous flux per square meter. It provides a standardized way to quantify how much light is hitting a surface.
History & Origin : Established as part of the SI system, the lux became the globally accepted unit for illuminance, replacing older regional units such as foot-candles.
Current Use : Used worldwide for lighting design, architecture, photography, and workplace safety to ensure appropriate lighting levels.
Details for Flame (Historical Light Source)
Introduction : Represents the illuminance from a standard candle flame, typically about 1 lux at 1 meter.
History & Origin : Based on early photometric definitions before SI standardization.
Current Use : Used for historical comparisons or candlelight reference levels.
Convert Lux to Other Units
FAQ on Lux to Flame Conversion:
What is the Symbol of Lux and Flame?
The symbol for Lux is 'lx', and for Flames, it is 'flame'. These symbols are used to denote illumination in everyday and technical measurements.
How to convert Lux(s) to Flame(es)?
To convert Lux(s) to Flame(es), multiply the number of Luxs by 1 because one Lux equals 1 Flames.
Formula: Flames = Luxs × 1.
This is a standard rule used in illumination conversions.
How to convert Flame(es) to Lux(s) ?
To convert Flame(es) to Lux(s), divide the number of Flames by 1, since, 1 Lux contains exactly 1 Flame(es).
Formula: Luxs = Flame(s) ÷ 1.
It’s a common calculation in illumination conversions.
How many Lux(s) are these in an Flame(es) ?
There are 1 Luxs in one Flame. This is derived by dividing 1 Flame by 1, as 1 Lux equals 1 Flame(s).
Formula: Lux = Flames ÷ 1.
It’s a precise unit conversion method.
How many Flame(es) are these in an Lux(s) ?
There are exactly 1 Flames in one Lux. This is a fixed value used in the measurement system.
Formula: Flame(s) = Luxs × 1.
It's one of the most basic conversions.
How many Flame in 10 Lux?
There are 10 Flames in 10 Luxs. This is calculated by multiplying 10 by 1.
Formula: 10 Luxs × 1 = 10 Flames.
This conversion is helpful for illumination measurements.
How many Flame(s) in 50 Lux?
There are 50 Flames in 50 Luxs. One can calculate it by multiplying 50 by 1.
Formula: 50 Luxs × 1 = 50 Flames.
This conversion is used in many applications.
How many Flame(s) in 100 Lux?
There are 100 Flame(s) in 100 Luxs. Multiply 100 by 1 to get the result.
Formula: 100 Luxs × 1 = 100 Flame(s).
This is a basic unit conversion formula.